As far as the other post from Robbie asking:
"What in the HELLO did you guys do in your former lives ????!!! I'm fairly good at this, but you guys thro me to the ground, and THEN stomp on me !!! Robbie"
I have no idea what he is talking about, except it should be clear that in my former life it wasn't as IT manager! I'm struggling with this stuff!
Dave
--- In InternetByCellPhone@yahoogroups.com, Leslie Johnson <bithits@...> wrote:
>
> Hi Dave,
>
> Your best bet might be to use a router that's made for Cell usage, such as
> a Cradlepoint. That way you can use the cell modem connection to the router
> directly, and let it do the network address translation with your two (or
> more) computers.
>
> The setup you described would need two networks, with one device "dual
> homed", that is, connected to both networks using two interfaces. One
> interface goes to the cell connection, and one to the other computer. The
> dual-homed computer has to translate the local IP address of the second
> computer so that the cell connection "thinks" that there is one device
> attached. I don't know how to do this with Windows, though I've done it
> with Linux and BSD Unix many times. My guess is that Windows won't let you
> do it.
>
> - Les
>
> On Sat, Dec 10, 2011 at 3:18 PM, David <daveyjo@...> wrote:
>
> > **
> >
> >
> > When we travel, if wireless access is not available, we have used
> > Verizon's Americas' Choice plan on my Casio cell phone for internet access
> > via a USB cable - on one computer at a time. I have used a red crossover
> > cable to tie the two laptops together when we have one fee based wireless
> > account/password (like $$ Tengonet), and just log on through one laptop.
> > But I have been unable to tie the two laptops together in similar fashion
> > to simultaneously access the internet through my cellphone. Worse, I was
> > unable to tie the 2 together at all with a crossover cable once one
> > computer was upgraded to Windows 7. Maybe that was just that I hadn't
> > figured out how to do it. But now we have 2 Windows 7 laptops, so that's a
> > newer challenge. Also, we now have a wireless printer as well. They all tie
> > together at home on my DSL router just fine. But how to do it when I don't
> > have a DSL line to connect to the internet?
> >
> > I suppose I could still use a router to create a network in the MH and tie
> > the 2 laptops and the printer together. However, that router wouldn't be
> > connected to the net. I can connect one laptop to the net through my Casio
> > cellphone, but I don't know how to make the other cellphone and the new
> > printer/fax access the net through the laptop connected to the cell phone.
> > I am not looking to upgrade my Verizon service (and lose access to the
> > Americas' Choice plan.) Can anyone offer some advice on how to do this?
> >
> > A second question is: how can I use the fax modem built into my new
> > printer to connect and dial my cellphone?
> >
> > Dave J
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/InternetByCellPhone/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/InternetByCellPhone/join
(Yahoo! ID required)
<*> To change settings via email:
InternetByCellPhone-digest@yahoogroups.com
InternetByCellPhone-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
InternetByCellPhone-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
0 komentar: